SDA-4600
- 600WPC into 8 ohms, 1,200W into 8 ohms Bridged Channel Pairs
- Balanced and Unbalanced Analog Inputs via Phoenix Terminal Block Connectors
- BLU-Link Digital Audio Networking
- Barrier Strip Speaker Terminals
- High-efficiency Internal Cooling Fans
- Advanced Digital Signal Processing with Limiters, Delays, and Additional Control
- 600WPC into 8 ohms, 1,200W into 8 ohms Bridged Channel Pairs
- Balanced and Unbalanced Analog Inputs via Phoenix Terminal Block Connectors
- BLU-Link Digital Audio Networking
- 600WPC into 8 ohms, 1,200W into 8 ohms Bridged Channel Pairs
- Balanced and Unbalanced Analog Inputs via Phoenix Terminal Block Connectors
- BLU-Link Digital Audio Networking
Your zip code edit
In Stock
600WPC into 8 ohms, 1,200W into 8 ohms Bridged Channel Pairs
Balanced and Unbalanced Analog Inputs via Phoenix Terminal Block Connectors
BLU-Link Digital Audio Networking
Features
Barrier Strip Speaker Terminals
High-efficiency Internal Cooling Fans
Advanced Digital Signal Processing with Limiters, Delays, and Additional Control
Specs & Downloads
Item# SDA-4600
Description
SDA 4600
The SDA-4600 is a versatile 4-channel Class D power amplifier designed to deliver maximum power while taking up minimal rack space. Each channel is rated to deliver 600W into 8 ohms and adjacent channel pairs can be bridged to deliver 1,200W into 8 ohms. This flexible channel configuration makes this an ideal amplifier to power larger LCRs and subwoofers in JBL Synthesis immersive audio systems. Powerful built-in DSP allows for custom loudspeaker tuning and full external control allows for complete and easy system integration.
General Specifications
- Cooling
- Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (dBA SPL @ 1M)
- 45
- Required AC Mains (±10%)
- 100Vrms - 240Vrms ~50/60Hz
Audio Specifications
- Rated Output Power Into 8 Ohms
- 600W
- Rated Output Power Into 4 Ohms
- 600W
- Rated Output Power Into 2 Ohms
- 300W
- Bridged Output Power Into 8 Ohms
- 1200W
- High Impedance
- 70-Volt & 100-Volt Capable
- Frequency Response (8Ω, 20Hz - 20kHz)
- ±0.25dB
- Analog Input Signal to Noise Ratio
- 104 dB
- BLU link Input Signal to Noise Ratio (A-Weighted)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Damping Factor (20Hz to100Hz)
- >1000
- Input Impedance (nominal balanced, unbalanced)
- 10kΩ, 5kΩ
- Load Impedance Stereo/Dual Mode
- 2Ω - 16Ω; 70Vrms and 100Vrms
- Load Impedance Bridge Mono
- 4Ω - 16Ω; 140Vrms and 200Vrms
Maximum Input Level before Compression (Low Gain Mode); (+)20dB
Dimensions
- Width
- 19 in. (48.3 cm)
- Height
- 3.5 in. (8.9 cm)
- Depth
- 14.25 in. ( 35.63 cm)
- Weight
- 20.1lbs (9.12kg)
Control and Connection Specifications
- Four balanced line inputs
- 6-pin block connectors (Two channels per block connector)
- Four speaker level outputs
- Terminal strip (accepts up to 10AWG wire)
- BLU link Input/Output
- RJ-45 (Category 5e)
- Ethernet
- RJ-45 (Category 5e)
- Programmable General Purpose Input/Output Ports
- 3-pin block connector (Enables SLEEP mode and monitoring of AMP STATUS)
- Power Connector
- 15A IEC
Documents & Downloads
Support
Register your Harman Audio product
Do you own this product? Register it here in case you need to claim warranty
Register NowCan't find what you're looking for?
Are you looking for product support, documentation, how-tos or older products?
Harman Audio Support