SCL-6
- Patented 2410H-2 1-inch (25mm) Compression Driver
- Patented High-Definition Imaging Horn Geometry
- Quadruple 5.25-inch (130mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers
- Molded Baffle with Patented Cat Claw Installation Mechanism
- Advanced Crossover Network
- Gold-plated Spring-loaded Binding Post Input Terminals
- Zero-bezel, Magnetically-attached Paintable Grille
- Patented 2410H-2 1-inch (25mm) Compression Driver
- Patented High-Definition Imaging Horn Geometry
- Quadruple 5.25-inch (130mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers
- Patented 2410H-2 1-inch (25mm) Compression Driver
- Patented High-Definition Imaging Horn Geometry
- Quadruple 5.25-inch (130mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers
Your zip code edit
In Stock
Patented 2410H-2 1-inch (25mm) Compression Driver
Patented High-Definition Imaging Horn Geometry
Quadruple 5.25-inch (130mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers
Features
Molded Baffle with Patented Cat Claw Installation Mechanism
Advanced Crossover Network
Gold-plated Spring-loaded Binding Post Input Terminals
Zero-bezel, Magnetically-attached Paintable Grille
Specs & Downloads
Item# JBLSCL6
Description
SCL-6
The SCL-6 is the largest traditional in-wall model in the JBL Synthesis Custom Loudspeaker (SCL) series. It is designed for use as an LCR or surround channel in a variety of applications. The SCL-6 features JBL’s patented 2410H-2 1-inch (25mm) compression driver mated to a High Definition Imaging (HDI™) horn. This patented horn design is integrated with four 5.25-inch (130 mm) Advanced Aluminum Matrix cone cast-frame woofers into a precision molded baffle assembly. The configuration yields incredibly smooth and consistent performance for in-wall LCR or surround applications. The SCL-6 is acoustically designed to match any of the JBL Synthesis Custom Loudspeakers (SCL series) as part of a complete JBL Synthesis immersive audio solution. It is ideal for use in small, medium, or large rooms.
General Specifications
- Type
- 2.5-Way In-wall loudspeaker
- Low Frequency Driver
- Four 5.25” (130 mm) advanced Aluminum Matrix cone cast-frame woofers (JW13Al-4)
- High Frequency Driver
- 1" (25 mm) 2410H-2 Teonex annular ring-diaphragm compression driver
- Recommended Amplifier Power
- 25 – 200W RMS
- Impedance
- 4 Ohm
- Loudspeaker Sensitivity
- 91 dB/2.83V/1m (2pi anechoic)
- Frequency Response
- 50Hz - 30kHz (-6 dB on-axis), 2pi anechoic
- Crossover Frequency
- 1.8 kHz
- High Frequency Coverage Angle (-6 dB)
- 80° Vertical / 80° Horizontal, from 2 kHz to 17 kHz.
- Enclosure Type
- Open back
- Controls
- Boundary Proximity Control
- Grille Dimensions
- 7.29” (185 mm) x 31.32” (796 mm)
- Product Dimensions (with grille)
- 7.29” (185 mm) x 31.32” (796 mm) x 3.82” (97.1 mm)
- Cut-out Dimensions
- 6.18” (157 mm) x 30.18” (766 mm)
- Rough-in Bracket
- WB54
- Mounting Depth
- 3.63” (92 mm)
- Input Type
- Gold-plated spring-loaded binding posts
- Product Weight
- 22.2 lbs (10.07 kg)
- Shipping Weight
- 25.6 lbs (11.61 kg)
- Shipping Units of Measure
- Each
- Warranty
- 5 Years
Documents & Downloads
Support
Register your Harman Audio product
Do you own this product? Register it here in case you need to claim warranty
Register NowCan't find what you're looking for?
Are you looking for product support, documentation, how-tos or older products?
Harman Audio Support