SCL-2

Patented D2415K 1.5-inch (38mm) Dual diaphragm, Dual Motor Compression Driver
Patented High-Definition Imaging Horn Geometry
Triple 8-inch (200mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers
Sonoglass® baffle with Integrated MDF Enclosure and Isolation Mounting System
Advanced Crossover Network with Bi-wire/Bi-amp Capability
Dual Gold-plated Spring-loaded Binding Post Input Terminals
Zero-bezel, Magnetically-attached Paintable Grille

Patented D2415K 1.5-inch (38mm) Dual diaphragm, Dual Motor Compression Driver
Patented High-Definition Imaging Horn Geometry
Triple 8-inch (200mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers

Patented D2415K 1.5-inch (38mm) Dual diaphragm, Dual Motor Compression Driver
Patented High-Definition Imaging Horn Geometry
Triple 8-inch (200mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers

Check delivery time at: Cancel

Your zip code edit

SCL-2

Patented D2415K 1.5-inch (38mm) Dual diaphragm, Dual Motor Compression Driver

Patented High-Definition Imaging Horn Geometry

Triple 8-inch (200mm) Cast-frame, Advanced Aluminum Matrix Cone Woofers

Features

Sonoglass® baffle with Integrated MDF Enclosure and Isolation Mounting System

Advanced Crossover Network with Bi-wire/Bi-amp Capability

Dual Gold-plated Spring-loaded Binding Post Input Terminals

Zero-bezel, Magnetically-attached Paintable Grille

Specs & Downloads

Item# JBLSCL-2

Description

SCL-2

The SCL-2 is a custom in-wall loudspeaker designed primarily for use as an LCR or surround in larger systems. It features JBL's patented D2415K dual 1.5-inch (38mm) compression driver mated to a large format High-Definition Imaging (HDI™) horn. Triple 8-inch (200mm) Advanced Aluminum Matrix cone cast-frame woofers operate in a 2.5-way network configuration allowing for installation vertically or horizontally without lobing or other acoustical issues found in traditional designs. The integrated MDF enclosure is designed for installation in standard 2x6 wood frame construction, and Internal connections allow for bi-wiring or bi-amplification in advanced installations. The SCL-2 delivers unparalleled performance in a wide variety of applications and is ideal for use in medium, large, and extra-large rooms.

General Specifications

Speaker type: 2½-way in-wall loudspeaker
Low frequency transducer: Three 8” (200mm) cast-frame, Advanced Aluminum Matrix cone woofers
Mid/High frequency transducer: D2415K, 1.5” (38mm), dual annular ring Teonex® diaphragm compression driver mounted to Sonoglass® horn/baffle
Maximum recommended power: 445 Watts RMS (CEA-426B specification, calculated onto the SCL-2 rated load impedance)
Frequency response (-6 dB on-axis): 57 Hz – 25 kHz
Coverage area (-6dB@20kHz): 80 x 70 Degrees (Hor x Vert)
Coverage area (-6dB@10kHz): 100 x 100 Degrees (Hor x Vert)
Sensitivity (2.83V@1m): 92dB
Nominal Impedance: 6 Ohm
Crossover frequencies: 225Hz; 1.3kHz
Enclosure type: Sealed in-wall mount with included back box
Inputs: Dual gold-plated binding posts
Finished grille dimensions (H x W): 40.25” x 12.84” (1022.4mm x 326mm)
Final cutout dimensions with backbox (H x W): 38.5” x 11.75” (977.9mm x 298.5mm)
Mounting depth with backbox: 5.8” (147mm)
Weight: 53.5 lb (24.3 kg)
Finishes: Matte Black with white paintable grille